Pan Phillips Self-Tapping Screw (DIN 7981)

Stainless steel Pan Phillips self-tapping screws designed for reliable fastening applications. Available in a range of sizes to meet different project requirements.




CSK Phillips Self-Tapping Screw (DIN 7982)

Stainless steel CSK Phillips self-tapping screws designed for flush and secure fastening. Available in different sizes and finishes to meet varied industrial, hardware and general fastening requirements.

Length 8MM To 100MM

Diameter 2.9# To 6.3#

Theads Type : AB TYPE AND B TYPE

Material Stainless Steel and as per customer requirements Standards :DIN, ISO



Drywall Screws (DIN 18182-2)

Drywall screws with a bugle head and sharp point, designed for secure and efficient fastening of gypsum plasterboard to wood and light-gauge metal framing. The deep thread provides reliable holding power, while the bugle head helps achieve a clean, flush finish. Available in various diameters, lengths and finishes as per buyer requirements.

Standard: DIN 18182-2 | Head: Bugle | Drive: Phillips | Material: Hardened Carbon Steel / Stainless Steel | Finish: Black Phosphate / Zinc / Stainless Steel | Diameter: 3.5, 4.0, 4.2, 4.3, 4.8, 5.0, 5.5 mm | Length: 25–130 mm | Application: Drywall & Gypsum Board | Packaging: Bulk / Box / Custom






PAN Head Self Tapping Screws (DIN-7971)

Description: PAN Head Self-Tapping Screws designed for secure fastening in metal, plastic and other materials. Available in carbon steel and stainless steel, with different sizes and finishes as per requirement.

Standard: DIN 7971 | Head: Pan Head | Drive: Slotted | Material: Carbon Steel / Stainless Steel | Finish: Zinc / Black / Stainless Steel | Diameter: 2.2–6.3 mm | Length: 6–100 mm | Packaging: Bulk / Box / Custom






CSK Head Self Tapping Screws (DIN-7972)

CSK Head Self-Tapping Screws designed for flush and secure fastening in metal, plastic and other materials. Available in carbon steel and stainless steel, with various sizes and finishes as per requirement.

Standard: DIN 7972 | Head: Countersunk (CSK) | Drive: Slotted | Material: Carbon Steel / Stainless Steel | Finish: Zinc / Black / Stainless Steel | Diameter: 2.2–6.3 mm | Length: 6–100 mm | Packaging: Bulk / Box / Custom






CSK Philips Head Wood Screw (DIN-7997)

CSK Phillips Head Wood Screws designed for secure and flush fastening in wood and timber applications. Available in carbon steel and stainless steel, with various sizes and finishes as per requirement.

Standard: DIN 7997 | Head: Countersunk (CSK) | Drive: Phillips | Material: Carbon Steel / Stainless Steel | Finish: Zinc / Black / Stainless Steel | Diameter: 2.5–8.0 mm | Length: 10–200 mm | Packaging: Bulk / Box / Custom






CSK Philips Machine Screws (DIN-965)

CSK Phillips Machine Screws designed for flush and secure fastening with threaded holes and nuts. Available in carbon steel and stainless steel, with various sizes and finishes as per requirement.

Standard: DIN 965 | Head: Countersunk (CSK) | Drive: Phillips | Material: Stainless Steel | Finish: Zinc / Black / Stainless Steel | Diameter: M2–M10 | Length: 4–100 mm | Packaging: Bulk / Box / Custom






Truss Head Machine Screws

Truss Head Machine Screws designed for secure fastening where a wider head and low-profile finish are required. Available in stainless steel and other materials as per customer requirements, with metric and inch thread options.




PAN Philips Machine Screws (DIN-7985)

PAN Phillips Machine Screws designed for secure fastening with threaded holes and nuts. Available in stainless steel and carbon steel, with various sizes, thread types and finishes as per customer requirements.




PAN Combination & Washer Machine Screws

Pan combination and washer machine screws (also known as SEMS screws) feature a pre-assembled, captive flat washer and/or spring lock washer under a low-profile Phillips pan head.

Key Features & Design

  • Pre-Assembled Design: Washers spin freely but remain permanently attached to the screw thread, preventing lost parts during assembly. 
  • Dual Protection: Typically includes a plain flat washer to distribute load and protect delicate surfaces from scratching, alongside a split spring lock washer to resist vibration loosening. [1]
  • Drive & Head: Features a standard Phillips cross-slot drive and a rounded, low-profile pan head. [1, 2]
  • Common Materials: Available in corrosion-resistant stainless steel (such as AISI 304) or nickel-plated mild steel





Button Head Socket Machine Screws (DIN-7380)

Button Head Socket Machine Screws conforming to DIN 7380 (now largely harmonized under ISO 7380) feature a low-profile, rounded dome head and a hexagonal socket drive

Key Features and Specifications

  • Head Style: Rounded, wide, and low-profile dome that distributes clamping force evenly and provides a clean, snag-free finish.
  • Drive Type: Hexagon socket (driven using an Allen wrench or hex key). 
  • Thread Sizes: Metric coarse threads ranging typically from M3 up to M16. 
  • Materials & Grades: Available in stainless steel (A2-70 / A4-70) for corrosion resistance and high-tensile alloy steel (Grade 10.9 or 12.9) for robust mechanical strength. [1]
  • Load Capacity: Designed with a lower head height and reduced loadability compared to standard socket head cap screws (DIN 912), making them ideal for aesthetic or low-clearance applications rather than extreme high-torque joints. [1, 2]



CSK Head Socket Machine Screws (DIN-7991)

CSK head socket machine screws conforming to DIN 7991 are countersunk fasteners featuring an internal hex (Allen) drive designed to sit completely flush with the mating surface.

Key Specifications & Design

  • Head Type: Flat countersunk (CSK) with a standard 90° countersink angle for sizes up to M20 (and 60°for M22 and larger).
  • Drive Style: Internal hexagon socket, tightened using a standard hex key or Allen wrench.
  • Standard Supersession: Formally specified under DIN 7991, though it has been technically superseded by DIN EN ISO 10642 as a global standard reference.
  • Available Sizes: Metric thread diameters typically range from M2 or M3 up to M24.



Carriage Bolts

Carriage bolts with a smooth domed head and square neck, designed for secure fastening where a clean, finished appearance is required. Suitable for wood, metal and general construction applications. Available in different diameters, lengths, materials and finishes as per buyer requirements.




Shaved Head Wood Screws

A shaved head wood screw features a smooth, ultra-low-profile countersunk head designed to sit completely flush or slightly below the wood surface for a clean, snag-free finish.

• Head Design: Low-profile countersunk (flat-top with a beveled underside) that prevents protrusion and allows smooth finishing over the joint.

• Drive Type: Typically traditional slotted (minus head) or standard linear slots.

• Thread Coverage: Frequently available in half-thread (partial threading) configurations to pull two wooden boards tightly together, though full-thread options exist.

• Material & Finish: Commonly manufactured from mild steel or stainless steel with zinc-plated, drum-polished, or chrome finishes for basic corrosion resistance.

• Applications: Ideal for hardware fittings, fine furniture assembly, cabinetry, and general wood joinery.

Standards & Common Sizes

• Commercial Standard: Produced to commercial grade specifications rather than rigid global ISO/DIN metric uniqueness, widely popular in regional hardware markets.

• Common Dimensions: Frequently sized around length variants like 20mm, 35mm, 40mm, 60mm, and 75mm, with typical gauge/thickness combinations like 35x8mm or specific wire gauges (e.g., 3 Gauge up to 10 Gauge).



Chipboard Screws(DIN-7505)

Chipboard screws are specialized fasteners with deep, coarse threads and a thin shank designed to grip composite wood materials like particleboard, MDF, and chipboard without splitting them.

Chipboard screws are self-tapping screws with a small screw diameter. It can be used for precision applications like the fastening of chipboards of varying densities. They have coarse threads to ensure the perfect sitting of the screw on the chipboard surface. Most of the chipboard screws are self-tapping, which means that there is no need for a pilot hole to be pre-drilled. It is available in stainless steel, carbon steel, and alloy steel to bear more wear and tear while also making it more corrosion resistant.

The advantages of these screws are numerous. Despite having very high tensile strength, these screws are easy to use and prevent the surface from cracking or splitting even without the use of a washer. In addition to that, they are temperature resistant, which means that they can retain their mechanical and electrical characteristics even at very high or very low temperatures. All these features drastically increase the service life of these screws.



Allen Socket Head Cap Screw (DIN 912 / ISO 4762)

High-strength socket head cap screws with a cylindrical head and internal hexagonal drive, designed for secure and precise fastening where a compact head profile is required. Suitable for machinery, engineering, automotive, industrial equipment and general assembly applications. Available in different sizes, materials and finishes as per buyer requirements.

Technical Details

  • Standard: DIN 912 / ISO 4762
  • Head Type: Cylindrical Socket Head
  • Drive: Internal Hex / Allen
  • Material: Carbon Steel / Stainless Steel
  • Property Class: 8.8 / 10.9 / 12.9 (Steel)
  • Thread: Metric, Fully Threaded
  • Diameter: M3 – M20
  • Length: 5 mm – 200 mm
  • Finish: Plain / Zinc Plated / Black Oxide / Stainless Steel
  • Thread Type: Metric Coarse
  • Application: Machinery, Engineering, Automotive, Industrial Equipment & General Assembly



CUP HOOKS

Cup Hooks designed for secure hanging and fixing applications in wood and other suitable surfaces. Available in Brass, Stainless Steel and Mild Steel, with various sizes and finishes as per customer requirements.




INVENTO® CSK Phillips Head Self-Drilling Screws

INVENTO® CSK Phillips Head Self-Drilling Screws are designed for fast and efficient fastening of metal and other suitable materials without the need for a pre-drilled pilot hole. The precision-engineered drill point penetrates the material while the sharp threads form a secure connection, helping to reduce installation time and improve fastening efficiency.

The countersunk (CSK) head sits flush with the surface for a clean and professional finish, while the Phillips drive provides convenient installation and controlled torque transfer. These screws are suitable for applications including sheet metal, aluminium sections, door and window frames, gypsum boards, light-gauge steel and general hardware work.

Available in Carbon Steel and Stainless Steel, with different sizes and finishes to meet specific application and buyer requirements. Zinc-plated carbon steel options provide corrosion protection, while stainless steel options are suitable where enhanced corrosion resistance is required.

Technical Details:

  • Head Type: CSK / Countersunk
  • Drive: Phillips / PH
  • Point: Self-Drilling / TEK Point
  • Material: Carbon Steel / Stainless Steel
  • Standard: DIN 7504-P
  • Thread: Full Thread
  • Finish: Zinc Plated / Stainless Steel / As Required
  • Sizes: 3.9 mm, 4.2 mm, 4.8 mm, 6.3 mm diameter options
  • Applications: Sheet Metal, Aluminium Sections, Door & Window Frames, Gypsum Board, Light Steel & General Fastening
  • Packaging: Bulk / Box / Custom Packaging
  • Custom Requirements: Sizes, finishes and packaging can be supplied as per buyer requirements.




INVENTO® Truss / Wafer Head Self-Drilling Screw

INVENTO® Truss / Wafer Head Self-Drilling Screws are designed for fast, secure and efficient fastening of metal sheets, light-gauge steel, aluminium sections, door and window frames and other suitable construction and hardware applications. The precision-engineered self-drilling point allows the screw to drill, tap and fasten in a single operation, reducing installation time and eliminating the need for pre-drilling in suitable materials.

The low-profile Truss/Wafer head provides a neat appearance and a broad bearing surface for secure seating against the fastening material. The Phillips drive enables easy installation with commonly used power tools and provides controlled fastening.

INVENTO® Truss/Wafer Head Self-Drilling Screws are available in Carbon Steel and Stainless Steel, with different diameters, lengths and finishes to meet specific application requirements. Zinc-plated carbon steel options offer corrosion protection, while stainless steel versions provide enhanced corrosion resistance for demanding environments.

Technical Details

  • Product Type: Truss / Wafer Head Self-Drilling Screw
  • Head Type: Truss / Wafer Head
  • Drive: Phillips / PH
  • Point: Self-Drilling / TEK Point
  • Material: Carbon Steel / Stainless Steel
  • Standard: DIN 7504-T
  • Thread: Full Thread
  • Finish: Zinc Plated / Stainless Steel / As Required
  • Sizes: Various diameters and lengths
  • Applications: Sheet Metal, Light-Gauge Steel, Aluminium Sections, Door & Window Frames, HVAC & General Construction
  • Packaging: Bulk / Box / Custom INVENTO® Packaging
  • Custom Supply: Sizes, materials, finishes and packaging as per buyer requirements.




INVENTO® Pan Phillips Head Self-Drilling Screws

INVENTO® Pan Phillips Head Self-Drilling Screws are designed for fast, secure and efficient fastening of metal sheets, aluminium sections, door and window frames, light-gauge steel and general metal assemblies. The precision-engineered drill point allows the screw to drill, tap and fasten in a single operation, reducing installation time and eliminating the need for pre-drilling in suitable applications.

The rounded Pan Head provides a clean appearance and reliable bearing surface, while the Phillips drive enables convenient installation with standard power tools. Available in Carbon Steel and Stainless Steel, with different sizes and finishes to meet specific application and buyer requirements.

Technical Details

  • Head Type: Pan Head
  • Drive: Phillips / PH
  • Point: Self-Drilling / Drill Point
  • Material: Carbon Steel / Stainless Steel
  • Standard: DIN 7504-N / ISO 15481
  • Thread: Self-Tapping / Full Thread
  • Finish: Zinc Plated / Stainless Steel / As Required
  • Diameter: 2.9 mm – 6.3 mm
  • Length: Various lengths available
  • Applications: Sheet Metal, Aluminium Sections, Door & Window Frames, Light Steel, HVAC & General Assembly
  • Packaging: Bulk / Box / Custom INVENTO® Packaging
  • Custom Supply: Sizes, materials, finishes and packaging as per buyer requirements.